Do Resale Properties Really Cost More To Renovate?

If you’re choosing between a new launch and a resale property, you’ve probably heard the saying that “the resale will cost more to renovate”. 

The theory is that, because you need to hack up the previous work, there’s added time and money involved. The saying is so widespread, some buyers take it as incentive to always stick to new launches.

The trouble is, there’s no proper way to prove this.

The cost of renovations varies on a case-by-case basis; and there’s no actual study that proves resale units will cost more to renovate. On top of that, there’s no sure way to tell how much more the renovations will cost. 

So we talked to multiple contractors, to try to dig out the truth behind this:

First, let’s look at the average cost of renovations in Singapore 

Based on responses from contractors, the average cost to renovate a four-room HDB flat (arguably the most common housing type in Singapore) ranges between $45,000 to $60,000. 

For condo units, the overall cost (for renovations of equal scale and quality) tends to be in the range of $50,000 to $65,000. The reason given to us was that condo units tend to have a higher floor-to-ceiling height; certain works – such as carpentry and painting – will incur higher charges. 

Condo units also have more demanding restrictions, due to the MCST. This may require more expensive site protections for common areas. For example, if you have a ground floor condo unit, and want to build a patio, additional protections must be made if your decking comes close to the landscaped areas.

In every case, we’re told the lowest budget estimate tends to be around $30,000. This is mainly because the maximum size of a renovation loan (if you use a bank) is $30,000, or six months of your income, whichever is higher.

But if you browse most websites or ask for a quote, you’ll be told the cost can be 20 per cent to a ridiculous 40 per cent (!) more for resale units.

Exact figures vary for every home, and when I say vary I do mean that it really varies. It’s an age old issue with the construction industry, costs are opaque so you never really have a concrete baseline to compare with.

Anyhow, here’s a general look (from what we have compiled) of the extra costs that a resale unit may incur. 

Besides the above, we need to bear in mind that older resale units tend to be bigger than newer units.

Let’s say you use simple laminate wood flooring, which is $6 psf.

The average 4-room flat, in the 1980s, was about 1,130 sq ft. Today, the average 4-room flat is about 969 sq.ft.

So if you were to buy a BTO flat with 969 sq. ft., the flooring cost can be estimated at $5,814. 

However, if you buy a resale flat built in the 1980’s, the sheer size difference means it costs $6,780 psf; a difference of $966. Upgrade it to hardwood (about $30 psf), and the price discrepancy becomes $4,830.

Remember this is before we factor in hacking costs, to tear up the old floor. 

In spite of the above, the renovations for resale units don’t necessarily end up costing more all the time. 

The renovation quotes for resale units are often higher, because it’s easy for it to end up being more expensive. However, if you isolate the main causes, you’ll see it’s possible to pay the same for renovating a resale unit as a new one.

The main factors are:

• Unit size
• Hacking up the previous works 
• Condition of existing plumbing and electrical works 
• White goods

1. Unit size

The higher cost of renovation is more closely related to the size of the unit, than to whether it’s older or newer. If you’re an investor, remember to factor it into your calculations.

For example, between buying a new condo unit that’s 400 sq.ft., versus an older one that’s 510 sq.ft., the difference isn’t just the quantum – you need to factor in the higher renovation costs you’ll face, given the requirement to hack up and replace flooring, walls, repainting, etc. over a larger area. 

Get an early estimate from a contractor, and work this into your likely rental yield and returns. A smaller, newer property may be a more viable option.

If you’re a homeowner, bear in mind that older resale units may be larger – but that size can work against you in terms of renovation costs. Remember that the maximum renovation loan is $30,000 only, before you decide to buy a humongous unit from the 1980’s.

2. Hacking up the previous works 

You can mitigate a lot of these costs by choosing to live with the existing renovations. One of the contractors we spoke to said the biggest waste – in her opinion – was hacking up rooms that were renovated just two to three years before the unit was bought. 

Try to pick a resale unit with interior design you already like. This way you just add what’s lacking, and your renovation costs probably won’t be higher than a new unit. 

One of our contractors also offered a simple way around the cost of hacking up the whole floor or wall. That’s to use an overlay instead – this is when a layer of new material is placed over the older one, instead of hacking it away and replacing it.

This is especially good with balconies, kitchens, and bathrooms, as it spares you from having to re-waterproof the surfaces (you’ll need to speak to a contractor for a ballpark figure though, as the cost varies highly for each unit). 

Read this next

Read this next

Design10 Kitchen Accessories For A Stylish Kitchen

by Stacked

3. Condition of existing plumbing and electrical work

Without extensive plumbing work, the difference between a new and resale unit is only about $100 for bathrooms (and that assumes the new unit comes with basic fixtures). 

If electrical work isn’t needed, and all light fixtures are working properly, there could be no cost difference between new and resale renovations.

In short, be picky about the condition of the property, to avoid higher resale renovation costs. 

You should try to negotiate for the seller to fix plumbing or electrical problems, before you purchase the unit (or offer less for the unit, to make up for these costs). You can contact us on Facebook, if you need help with assessing older properties or negotiations. 

4. White goods

Contractors mentioned one of the key things to avoid is relocating the air-conditioner. This requires re-running the wiring and piping; in some cases this can cost over $2,000 (at which point you may want to consider if it’s worth installing a new one). 

And while fridges are often replaced anyway, you may want to consider ensuring you have a working washing machine, dryer, or other essential appliances with the resale unit. If all of these are in good working order, you might not be paying more for resale renovations after all.

In conclusion, it’s not true that resale units always cost more to renovate

Many of the cost differences we’ve detailed are avoidable.

If the resale unit is well maintained, and you already like the existing design, it can cost about the same to renovate as a new unit. You just have to be alert to the maintenance-related issues before you buy.